Die Heads (PVC)
- High-Volume Low-Pressure design.
- Suitable for single-pipe and dual-pipe production.
- Uniform melt distribution.
- Die head with trolley for easy movements.
- 80 to 100% utilization of extruders.
- Twin Die is suitable for small size pipes with higher output.
SINGLE DIE HEAD:
| Model | Pipe Range (mm) | Output Capacity (Kg/Hr) |
|---|---|---|
| WP 63 | 20-63 | 100 |
| WP 110 | 20-110 | 200 |
| WP 200LV | 20-200 | 250 |
| WP 200HV | 63-200 | 320 |
| WP 250 | 90-250 | 425 |
| WP 315 | 110-315 | 550 |
| WP 400 | 110-400 | 700 |
| WP 630 | 250-630 | 1000 |
TWIN DIE HEAD:
| Model | Pipe Range (mm) | Output Capacity (Kg/Hr) |
|---|---|---|
| WTDP 50 | 19-50 | 200 |
| WTDP 63 | 20-63 | 200 |
| WTDP 110 | 20-110 | 400 |
| WTDP 200 | 63-200 | 850 |
DIE HEADS (PE)
We offers Spiral designed versatile Die head for PE/PPR/ABS materials by changing only tooling. We offer single-layer, two-layer and three-layer die head with Co-Extrusions.
- Most reliable Spiral Mandrel designed Die.
- Very short purging times.
- Uniform Melt flow.
- Improved inner pipe surface.
- Optimum back pressure to balance compression and melt temp control.
SINGLE LAYER DIE HEAD SPECIFICATION:
| Model | Pipe Range (mm) | Output Capacity (Kg/Hr) |
|---|---|---|
| WSM 50 | 12 – 50 | 100 |
| WSM 110 | 20 – 110 | 350 |
| WSM 250 | 63 – 250 | 800 |
| WSM 400 | 90 – 400 | 1100 |
| WSM 630 | 225 – 630 | 1500 |
TWO & THREE LAYER DIE HEAD SPECIFICATION:
| Model | Pipe Range (mm) | Outer Thickness in % | Layer | Output Capacity (Kg/Hr) |
|---|---|---|---|---|
| WCSM 50 | 12 – 50 | 90 | 2 | 100 |
| WCSM 50/R | 12 – 50 | 10 | 2 | 100 |
| WCSM 110 | 20 – 110 | 90 | 2 | 240 |
| WCSM 110/R | 20 – 110 | 10 | 2 | 240 |
| WTSM 110/R | 20 – 110 | 10: 80: 10 | 3 | 240 |
| WTSM 110 | 20 – 110 | 10: 80: 10 | 3 | 240 |
| WTSM 110 HV | 20 – 110 | 15: 70: 15 | 3 | 400 |
VACUUM SIZING TANK
- Vacuum Sizing Tank is available in mild steel as well as in SS 304.
- Highly intensive cooling is provided to ensure a higher production rate.
- Mechanically sealed water ring pumps to ensure proper vacuum inside the chamber.
- Aluminum cast. Lids with rubber sealing to avoid vacuum loss.
- Manual and motorized arrangement with sliding rail for axial and traverse movement of the Tank.
- Dual Vacuum Chamber Tank for easy start-up of pipe and less wastage.
- Precise water level control system.
- Adjustable spray nozzle.
- Water temperature controller with Sensor.
- Special filter for cleaning during operation.
| Model | Pipe Range (mm) | Cooling Length (mm) | No of Vacuum Chamber |
|---|---|---|---|
| WVT 110 | 20 – 110 | 4000/6000 | 1 |
| WVT 200 | 20 – 200 | 6000 | 1 |
| WVT 250 | 50 – 250 | 6000 | 2 |
| WVT 315 | 50 – 315 | 6000/8000 | 2 |
| WVT 400 | 63 – 400 | 6000/8000 | 2 |
| WVT 450 | 75 – 450 | 6000/8000 | 2 |
| WVT 630 | 110 – 630 | 6000/8000 | 2 |
PIPE COOLING TANK
- Extended Cooling Tank available in mild steel as well as in SS 304.
- Easy cleaning of the spray nozzles.
- Manual and effortless height adjustment.
- Lid made of mild steel or SS 304.
- Manual or fixed type structure arrangement depending upon the application.
- Special filter for cleaning during operation.
- Appropriate working platform for ease of operation
| Model | Pipe Range (mm) | Cooling Length (mm) |
|---|---|---|
| WCT 110 | 20 – 110 | 4000/6000 |
| WCT 200 | 20 – 200 | 6000 |
| WCT 250 | 50 – 250 | 6000 |
| WCT 315 | 50 – 315 | 6000/8000 |
| WCT 400 | 63 – 400 | 6000/8000 |
| WCT 450 | 75 – 450 | 6000/8000 |
| WCT 630 | 110 – 630 | 6000/8000 |
PIPE TRACTION
- Pipe Traction/ Haul-off units are available up to 6 tracks depending upon Pipe diameter.
- Option of Smith coupling or Direct Coupled Gear Box as per customer demand.
- Pneumatical track adjustment.
- Counterbalance arrangement to balance the weight of tracks for the thin pipes.
- Highly accurate encoder for Length measurement.
- AC variable drive for adjustment of line speed.
- Ease of compatibility with any extruder.
- Easily removable Rubber pads.
- Optional Servo Motors with the drive for minimum line speed up to 1% of the maximum speed available on request.
- Higher Line Speed Model available on request.
- State-of-the-art electrical panel with internationally standard components used.
| Model | Pipe Range (mm) | No of Track | Contact Length (mm) |
|---|---|---|---|
| WTU 110 | 20 – 110 | 2 | 800 |
| WTU 200 | 20 – 200 | 2 | 1200 |
| WTU 250 | 50 – 250 | 2 | 1250 |
| WTU 315 | 50 – 315 | 3 | 1200 |
| WTU 400 | 75 – 400 | 4 | 1600 |
| WTU 450 | 75 – 450 | 4 | 1600 |
| WTU 630 | 110 – 630 | 6 | 1450 |
TUBE / PIPE CUTTING UNIT
- Smooth and clean pipe cutter unit with easy movement of the table on linear bearing.
- Pneumatically operated carriage unit.
- Synchronized with the line speed by precise length counter and accurate Encoder.
- Carbide Tipped Circular Saw Blades for the cutting of the higher pipe thickness.
- Diamond Cutter especially for thin pipe.
- Pneumatically operated Jaw to clamp pipe properly for easy cutting.
- Electrical Panel with standard electrical components.
- Planetary Cutter above WCU - 250 Model.
| Model | Pipe Range (mm) | Blade Diameter (mm) |
|---|---|---|
| WCU 110 | 20 – 110 | 350 |
| WCU 200 | 20 – 200 | 550 |
| WCU 250 | 50 – 250 | 630 |
| WCU 315 | 90 – 315 | 850 |
| PCU 400 | 110 – 400 | 200 |
| PCU 630 | 110 – 630 | 350 |
Tube Tilting Units
- Pipe Tilting Unit with sturdy structure.
- Pneumatically operated unit.
- Pipe Resting Platform above 200mm diameter pipe.
- Limit Switch Actuation for proper tilting of pipe.
| Model | Pipe Range (mm) |
|---|---|
| WTU 110 | 20 – 110 |
| WTU 200 | 20 – 200 |
| WTU 250 | 50 – 250 |